LoRaWAN Path Loss Measurements in an Indoor Office Setting including Environmental Factors/Conditions
Over 2.66 million time-stamped records from 6 LoRaWAN nodes transmitting once per minute to our Kerlink gateway.
- Source
- Zenodo
- Published
- 2026
- Country
- Germany
- Region
- Europe
- Format
- csv
- Access
- Open access
- License
- cc-by-4.0
- Themes
- Climate & Temperature, Greenhouse Gases, Air Quality & Pollution
About this dataset
This dataset was collected during a LoRaWAN measurement campaign in a multi-room indoor office environment at the University of Siegen, Germany. It contains over 2.66 million time-stamped records from 6 LoRaWAN nodes transmitting once per minute to our Kerlink gateway. Each record includes environmental parameters: temperature, relative humidity, barometric pressure, particulate matter (PM2.5), and carbon dioxide (CO₂); as well as device metadata such as RSSI, SNR, spreading factor (SF), etc. The dataset also includes the effective signal power (ESP) and the noise power (NP) for LoRaWAN propagation analysis. The dataset is designed to support research on indoor wireless propagation, distance estimation (localization), and environment-aware modeling, among other IoT use cases and applications in line with the sixth generation (6G) flagship demands.
A detailed methodology and initial analysis are presented in our accompanying IEEE Access paper published as: Nahshon Mokua Obiri and Kristof Van Laerhoven, " A Comprehensive Data Description for LoRaWAN Path Loss Measurements in an Indoor Office Setting: Effects of Environmental Factors ," in IEEE Access , vol. 13, pp. 83148-83170, 2025, doi: 10.1109/ACCESS.2025.3569164 .
🔗 Additional Notes
The original dataset pulled directly from InfluxDB is provided as 1.unsorted_combined_measurements_data.csv .
The preprocessed version: filtered, sorted, and with variable renaming, aligned to the structure described in our journal paper, is included as 2.aggregated_measurements_data.csv .
The fully cleaned dataset, where anomalies have been removed, is available as 3.cleaned_dataset_per_device.csv .
Version history
v1, May 2025. First release, 26 September 2024 to 22 May 2025. File 2 has 1,715,869 records. File 3 has 1,217,313 records, and SF7 to SF10. The IEEE Access article analyses the first six months of the campaign, 26 September 2024 to 1 April 2025.
v2, March 2026. Files 2 and 3 extended to one year, 1 October 2024 to 30 September 2025, with 2,663,641 and 2,079,534 records. File 1 runs to 9 October 2025. Files 2 and 3 start on 1 October 2024, so the first five days of the article's window are only in file 1 and in v1.
v3, October 2026. Correction. In v1 and v2, RSSI and SNR, and with them ESP and NP, were read from the first gateway listed for each uplink. For some uplinks, this was another gateway of The Things Network, not our gateway kerlink001, and its RSSI was about 55 dB too weak, and its SNR was about 19 dB too low. In v2, this affects 10% of the records in file 2 and 2.9% in file 3; in v1, 2.8% of file 3. In v3, both values come from kerlink001's own entry. File 3 contains all spreading factors (SF7-SF12), totaling 2,660,274 records. Anomalies are removed by an Isolation Forest on the five environmental sensors, at 0.1% per node. Pressure in files 2 and 3 is now in hPa.
How the data was collected
This dataset was collected during a LoRaWAN measurement campaign in a multi-room indoor office environment at the University of Siegen, Germany. It contains over 2.66 million time-stamped records from 6 LoRaWAN nodes transmitting once per minute to our Kerlink gateway. Each record includes environmental parameters: temperature, relative humidity, barometric pressure, particulate matter (PM2.5), and carbon dioxide (CO₂); as well as device metadata such as RSSI, SNR, spreading factor (SF), etc. The dataset also includes the effective signal power (ESP) and the noise power (NP) for LoRaWAN propagation analysis. The dataset is designed to support research on indoor wireless propagation, distance estimation (localization), and environment-aware modeling, among other IoT use cases and applications in line with the sixth generation (6G) flagship demands.
A detailed methodology and initial analysis are presented in our accompanying IEEE Access paper published as: Nahshon Mokua Obiri and Kristof Van Laerhoven, " A Comprehensive Data Description for LoRaWAN Path Loss Measurements in an Indoor Office Setting: Effects of Environmental Factors ," in IEEE Access , vol. 13, pp. 83148-83170, 2025, doi: 10.1109/ACCESS.2025.3569164 .
🔗 Additional Notes
The original dataset pulled directly from InfluxDB is provided as 1.unsorted_combined_measurements_data.csv .
The preprocessed version: filtered, sorted, and with variable renaming, aligned to the structure described in our journal paper, is…
The fu…